-
Method for adjusting injection pressure and speed of injection molding machine
The working principle of an injection molding machine is to use the thrust of a screw to inject molten plastic into a closed mold cavity, and after solidification and shaping, obtain the desired product. As a production equipment for bulk plastic products, shortening the product production cycle and Date: 2024-11-29 -
Injection molding machine operation, various configuration time adjustment methods
Under mechanical operation, time adjustment is particularly important because if the molding time of the injection molding machine is not enough, the product may be scrapped, and if the molding time is too long, it cannot be ignored. Therefore, grasping the operation time of the injection molding ma Date: 2024-11-29 -
Injection molding machine with chiller, four tips on how to choose the right chiller
During the production process of injection molding machines, it is necessary to cool down the molds to achieve rapid solidification of plastics, improve product quality, and increase production efficiency. The addition of a chiller is essential here. The chiller is used in injection molding machines Date: 2024-11-29 -
What precautions should be taken for safe operation of injection molding machines
Starting from the production state of injection molding machines, their strong, high-speed, high-temperature, and high-pressure properties mean that they have a certain degree of danger. The so-called "beer machine jamming" refers to injection molding machine accidents. So, what are the co Date: 2024-11-29 -
Is injection molding machine still far from becoming 4.0 intelligent
The maintenance of injection molding machines is not very complicated, but there are many hidden problems during production, and many materials will be added during production. For example, scraps, discarded models, etc. can all be recycled and reused. We all know about such issues, but machine oper Date: 2024-11-29 -
Do you know the impact of mold opening on injection molding machines
In terms of production management of injection molding machines, controlling the cost of mold opening is the main node in controlling overall costs. Many owners of injection molding factories often complain about high operating costs, and at this time, they have to think about whether they can do th Date: 2024-11-29
